Lightware MX-FR17 Page 25 User Manual Download

Page: 25 / 190

3. Product Overview

MX-FR Series Modular Matrix Frames – User's Manual

Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2

3.9.

MX-FR33L

Front View

USB control

USB connection for Lightware Device Controller software.

Menu display

Displays status information and menu operation.

Menu navigation

Arrows, escape, and enter buttons for menu navigation.

Status LEDs

CPU live LED blinks to indicate normal operation. Power LED shines green

when the router is powered on.

Control lock

Press long to disable or enable front panel buttons. When it shines red, all

operations on front panel are prohibited.

Output lock

Locks one (or more) outputs. Inhibits accidental input changing on the

protected output.

Source buttons

Source buttons can be used to select an input or preset or to view the selected

input’s state.

Destination buttons

Destination buttons can be used to select an output, or view the selected

output’s state.

Take / Auto

Displays the current switching mode (TAKE or AUTOTAKE). Long press

toggles the switching mode, short press executes switching in TAKE mode.

Preset buttons

Load preset: apply a previously saved crosspoint preset from one of the

preset memories. Save preset: stores current crosspoint state in one of the

preset memories.

EDID mode

Switches the Menu display to EDID menu allowing EDID switch, EDID save etc.

Signal present

Displays live sources and attached sinks on source and destination buttons.

5
6



 



Summary of Contents for MX-FR17































































































































































































Search results

Summary of Contents for MX-FR17

Reviews:

Related manuals for MX-FR17

Brands by name

Popular brands

Lightware MX-FR17, User Manual

Search results

Summary of Contents for MX-FR17

Reviews:

Related manuals for MX-FR17

Brands by name

Popular brands