Lightware MMX6x2-HT200, User Manual

Page: 89 / 91

11. Appendix MMX6x2-HT series – User's Manual 89
11.5. Input and Output Port Numbering
Port name
Video port
no. (LW2)
Video port
no. (LW3)
Audio
port no.
EDID
memory
RS-232
port no.
IR port no.
Input Output
TPS input #1 1 I1 I1 E1 P2 S1 D1
TPS input #2 2 I2 I2 E2 P3 S2 D2
HDMI input #3 3 I3 I3 E3 - - -
HDMI input #4 4 I4 I4 E4 - - -
HDMI input #5 5 I5 I5 E5 - - -
HDMI input #6 6 I6 I6 E6 - - -
HDMI output #1 1 O1 O1 D1 - - -
HDMI output #2 2 O2 O2 D2 - - -
TPS output #1 * 3 O3 O3 D3 P4 S3 D3
TPS output #2 ** 4 O4 O4 D4 P5 S4 D4
Analog audio input #1 - - I7 - - - -
Analog audio input #2 - - I8 - - - -
Analog audio input #3 - - I9 - - - -
Analog audio input #4 - - I10 - - - -
Analog audio output #1 - - O5 - - - -
Analog audio output #2 - - O6 - - - -
Local RS-232 - - - - P1 - -
Mirrored outputs: O1-O3 and O2-O4.
* Only on MMX6x2-HT210 and MMX6x2-HT220 devices.
** Only on MMX6x2-HT220 device.
11.6. Maximum Twisted Pair Distances
Resolution
Pixel clock
rate
Cable lengths ( Auto / Longreach TPS mode)
CAT5e
AWG24
CAT7
AWG26**
CAT7
AWG23
1024x768@60Hz 65 MHz
100 m / 130 m* 90 m / 120 m* 120 m / 170 m* 1280x720p@60Hz 73.8 MHz
1920x1080p@60Hz / 24bpp 148.5 MHz
1920x1200@60Hz 152.9 MHz
100 m / NA 90 m / NA 120 m / NA
1600x1200@60Hz 162 MHz
1920x1080@60Hz / 36bpp 223.6 MHz
70 m / NA 70 m / NA 100 m / NA 3840x2160@30Hz UHD 297 MHz
4096x2160@30Hz 4K 297 MHz
* With Long reach operation mode which supports pixel clock frequencies up to 148.5 MHz.
** When remote powering is used with AWG26 cables, distances are 20% shorter.
11.7. Factory Default Settings
Parameter Setting/Value
Network Settings
IP address 192.168.0.100
Subnet mask 255.255.255.0
Static gateway 192.168.0.1
LW2 Port number 10001
LW3 Port number 6107
HTTP Port number 80
DHCP disabled
TPS and HDMI Port Settings
HDCP – on input ports Enabled
HDCP – on output ports Auto
Output TPS mode (on TPS output ports) Auto
Output HDMI mode Auto
Power 5V mode Auto
No sync screen mode Off
No sync screen color Bar
No sync screen resolution 480p
Crosspoint state HDMI I3 @ O1 & O3; HDMI I4 @ O2 & O4
Audio source Embedded audio
Autoselect Disabled
Autoselect video priority (from 0 to 5) I1, I2, I3, I4, I5, I6
PoE feature Enabled
Emulated EDID* F47 - Factory (1920x1080@60Hz HDMI)
Analog Audio Port Settings
Volume 0.00 dB
Balance 50 (center)
Gain 0.00 dB
RS-232 Settings
Control protocol LW2
Baud rate 57600
Databits / Parity / Stopbits 8 / No / 1
Operation mode (local and link ports) CI (Command Injection)
Command Injection port nr. (Local) 8001
Command Injection port nr. (TPSIN1) 8002
Command Injection port nr. (TPSIN2) 8003
Command Injection port nr. (TPSOUT1) 8004
Command Injection port nr. (TPSOUT2) 8005
* The default EDID has been changed since firmware 1.1.0. The default EDID for firmware 1.0.0 is D1, dynamic.
  
