Lightware MMX6x2-HT200, User Manual

Page: 17 / 91

3. Product Overview MMX6x2-HT series – User's Manual 17
Input selection automatically – example
The concept
If a video signal of the Blu-ray player is present on the HDMI input of the matrix, the source will be automatically
switched to the TPS output. If the video signal of the PC is also present on the other HDMI input of the
matrix, it will be switched to the TPS output. If the Laptop is connected, the TPS input will be switched to the
TPS output – independently of the presence of the other video signals.
Settings
TPS output
: Set the Autoselect to
Enabled
. The Autoselect mode is
Priority detect
. The priorities are the
followings:
Port Priority
Laptop
(I1, TPS IN)
0
PC
(I3, HDMI IN)
1
Blu-ray
(I4, HDMI IN)
2
The other inputs can be disabled. See the settings in Autoselect Settings section.
Laptop
Projector TPS receiver MMX6x2-HT220 TPS transmitter Blu-ray player PC
HDMI OUT
TPS OUT
TPS IN
HDMI IN
HDMI IN
HDMI
SOURCES
MMX6x2-HT220
Multiport HDMI and TPS Matrix Switcher
USB
CONTROL
DESTINATIONS
ENTER
LIVE
48V
RESET
5V
ESC
1 2
1 2
3 4 5 6
TTA AK KEE
A AU UTTO O
TTA AK KEE
A AU UTTO O
LLO OA AD D
PPR REESSEETT
LLO OA AD D
PPR REESSEETT
SSA AVVEE
PPR REESSEETT
SSA AVVEE
PPR REESSEETT
C CO ON NTTR RO OLL
LLO OC CK K
LLO OC CK K
O OU UTTPPU UTT
3.8. Control Features (Matrix Control and Third-Party Devices)
The interfaces of the MMX6x2-HT can be used to install the matrix at any place of a complex A/V system.
Besides, the matrix is able to handle controlling functions as well. This chapter is about to present the
possibilities through three simple layout examples.
System control via local Ethernet (example)
The following ways are available for controlling the devices:
▪
The
System controller
can communicate with LW2/LW3 protocol commands via the local IP:port
address of the
Matrix
, see the settings in Factory Default Settings section).
▪
The
System controller
can communicate directly with the
Projector
or an
Extender
via their IP:port address.
▪
The
System controller
can communicate directly with the RS-232
relay box
connected to the
Matrix
. In
this case,
Command Injection mode
has to be enabled on the local RS-232 port.
▪
The
matrix
can send a command (e.g. as an action by the Event Manager) to the IP:port address of the
Projector
or an
Extender
by using LW3 protocol methods; for details see the Infrared Port Configuration
section.
System control via local RS-232 (example)
The following ways are available for controlling the devices:
▪ The
System controller
can communicate with LW2/LW3 protocol commands via the local RS-232 port
of the
Matrix
(see the default RS-232 port settings in Factory Default Settings section).
▪ The
System controller
can send TCP or UDP messages to the IP:port address of the
Matrix
or the
Extender
,
by using LW3 protocol methods, see Infrared Port Configuration section.
▪ The
Matrix
can send TCP or UDP messages command to the
HDTV
or the
Extender
by using LW3 protocol
methods, see Infrared Port Configuration section.
System controller
LAN TPS OUT LAN
MMX6x2-HT220
TPS receiver Projector
Ethernet
LAN
TPS transmitter
TPS IN
Relay box
RS-232
SOURCES
MMX6x2-HT220
Multiport HDMI and TPS Matrix Switcher
USB
CONTROL
DESTINATIONS
ENTER
LIVE
48V
RESET
5V
ESC
1 2
1 2
3 4 5 6 TTA AK KEE
A AU UTTO O
TTA AK KEE
A AU UTTO O
LLO OA AD D
PPR REESSEETT
LLO OA AD D
PPR REESSEETT
SSA AVVEE
PPR REESSEETT
SSA AVVEE
PPR REESSEETT
C CO ON NTTR RO OLL
LLO OC CK K
LLO OC CK K
O OU UTTPPU UTT
  
