11. Appendix
MMX6x2-HT series – User's Manual
88
11.3.
Mechanical Drawings
Dimensions are in mm.
300
482
SOURCES
MMX6x2-HT220
Multiport HDMI and TPS Matrix Switcher
USB
CONTROL
DESTINATIONS
ENTER
LIVE
48V
RESET
5V
ESC
CONTROL
LOCK
SAVE
PRESET
LOAD
PRESET
TAKE
AUTO
LOCK
OUTPUT
43.9
1
3
TPS PoE
( )
TPS PoE
( )
442
Front View
Rear View
Side View
Top View
11.4. Content of the Backup File
The backup file contains numerous settings and parameters saved from the device. When the file is uploaded
to a device, the followings will be overwritten:
Local serial port
RS-232 mode, Control protocol, Baud rate, Data bits, Stop bits, Parity
Port name and CI (Command Injection) port number
Ethernet settings
Enable/Disable on Local, and TPS Link lines
HDMI input port
Audio mode, HDCP setting, Port name
Analog audio input port
Volume, Balance, Gain, Port name
TPS input port
Port names, TPS mode, PoE (enabled / disabled), Ethernet (Enable / Disable)
Audio mode (Embedded / AUX1-4), HDCP setting
RS-232 mode, Control protocol, Baud rate, Data bits, Stop bits, Parity, CI port number
IR input port status, code length, repetition code, CI mode, and CI port number
IR output port status, code length, repetition code, CI mode, and CI port number
HDMI output port
Power +5V mode, Audio mode, HDCP mode, HDMI mode, Port name
Test pattern mode, clock source, and type
Analog audio output port
Volume, Balance, Gain, Mute setting, Port name
TPS output port
Port names, TPS mode, PoE (enabled / disabled), Ethernet (Enable / Disable)
Test pattern mode, clock source, and type
HDCP mode, HDMI mode, Power +5V mode
RS-232 mode, Control protocol, Baud rate, Data bits, Stop bits, Parity, CI port number
IR input port status, code length, repetition code, CI mode, and CI port number
IR output port status, code length, repetition code, CI mode, and CI port number
Network settings
DHCP status (enable / disable)
LW2, LW3 and HTTP port numbers
Static IP address, Network mask, Gateway address
Further settings
Emulated EDID list, User EDID data (U1-U12)
Event manager: All Events’ settings (1-100)
All Presets’ settings (1-6)
