DA2DVI-Pro
User’s Manual Rev. 1.3
Page 33 / 43
Step 2.
Click on
FIND
button. The bootloader lists every Lightware device on the
Ethernet and available COM ports of the computer.
Info:
You must wait until every device boots up completely before pressing FIND button.
Step 3.
Double click on the COM port that the DA2DVI-Pro is connected to. The
bootloader cannot identify the devices on the COM ports so if you are
unsure about which virtual COM port the DA2DVI-Pro is connected to,
run the Matrix Controller software and check.
Summary of Contents for DA2DVI-Pro
