Lighthouse SOLAIR 1100LD, Operating Manual

Page: 113 / 188

Operate SOLAIR
248083395-1 Rev 9 6-49
Configuration Password
Enable the Configuration password to restrict who can configure the
instrument. With the Configuration password enabled, users are
required to enter the correct password to access the Configuration
screen. See Figure 6-69.
• At the Security screen, press the CFG button then type a password
using the numeric keypad.
• Press the ERASE button to delete the last character, if needed.
• Press ENTER to save the changes and return to the Security screen.
Figure 6-69 CONFIGURATION Password Access Screen
Service
This section of the Configuration screen is reserved for Lighthouse
Authorized Service Providers only. The correct service password must
be entered to access this area.
Three options on the lower CONFIG screen, STATUS, RECIPE and
LOC display the instrument’s current status, and allow the user to
configure user recipes and locations respectfully.