Lighthouse ApexZ Series Operator'S Manual Download Page 87 | Manualshive

Page: 87 / 162

Lighthouse ApexZ Series Operator'S Manual Download Page 87

Lighthouse Worldwide Solutions

ApexZ Operators Manual

248083466-1 R6

79

Connectivity

From the Settings screen press the Connectivity button to view Ethernet, WiFi, AD/LDAP, CIFS and 3

rd

Party API

settings.

LMS XChange Software 2.0

The LMS XChange 2.0 software was

designed for use with ApexZ particle counters and is downloadable from the

www.golighthouse.com

website. LMS XChange 2.0 allows users to import data collected on ApexZ3 and

ApexZ50 portable particle counters and display the data in a table that the user can view and/or save to an Excel
or PDF file. Additionally, Administrator users can manage configurations for ApexZ instruments using LMS
XChange. LMS XChange has the following main features:

• Import data manually from Lighthouse ApexZ3 and ApexZ50 particle counters.
•

Import .lsdx (Lighthouse secure data transfer) files created by ApexZ3 and ApexZ50 instruments.

• Display the imported data in a table, allowing the user to also export the data to an Excel or PDF file.
•

Three levels of user accounts – Operators, Power Users, and Administrative users.

• LMS XChange Administrator users can create, edit, save and load ApexZ3 and ApexZ50 configurations.
• Record logins, updates, delete, import, configuration changes, etc. in the LMS XChange Audit Log.

Connectivity

«
...
85
86
87
88
89
...
»

Summary of Contents for ApexZ Series



































































































































































Reviews:

No comments