Lighthouse ApexZ Series Operator'S Manual Download Page 104

Page: 104 / 162

Lighthouse Worldwide Solutions

ApexZ Operators Manual

248083466-1 R6

Assign Locations to a new Group

Select each location to be included in the group. Selected locations will highlight blue indicating they have been
assigned to the new group and they will display on the Assigned Locations list to the right.

Select the Name button to display the Enter Group Name screen.

Group Name

Use the keypad to enter the Group name.

Press the green Apply button to apply
the Group name.

Press the green Save button to save and
return to the Location/Group List. The

green save button only appears after a name has
been entered and the Apply button has been
pressed.

Group Name Screen

Selecting and Assigning Locations to the New Group

Summary of Contents for ApexZ Series



































































































































































Search results

Summary of Contents for ApexZ Series

Reviews:

Related manuals for ApexZ Series

Brands by name

Popular brands

Lighthouse ApexZ Series, Operator'S Manual

Search results

Summary of Contents for ApexZ Series

Reviews:

Related manuals for ApexZ Series

Brands by name

Popular brands