Lighthouse ApexZ Series Operator'S Manual Download Page 159

Page: 159 / 162

Lighthouse Worldwide Solutions

ApexZ Operators Manual

248083466-1 R6

151

Terminology

Button:

Area on the touch screen the user can press and ApexZ will accept input and commands.

Enable:

Green box with yellow check mark: this button indicates enabled.

Disable:

Red box with yellow “x” mark: this button indicates disabled.

Enter with the keypad:

Touch the screen keypad with your finger and type the required input. You may need to

press the green Apply button after entering text or numbers.

Inactive Button:

Button has a dark background color indicating the button is inactive and will

not

respond when pressed.

Press:

Touch the screen with your finger.

Select:

Touch the screen with your finger.

Toggle button:

This is a button that displays only 2 options, touch or slide to change between options.

Summary of Contents for ApexZ Series



































































































































































Search results

Summary of Contents for ApexZ Series

Reviews:

Related manuals for ApexZ Series

Brands by name

Popular brands

Lighthouse ApexZ Series, Operator'S Manual

Search results

Summary of Contents for ApexZ Series

Reviews:

Related manuals for ApexZ Series

Brands by name

Popular brands