Lighthouse ApexZ Series Operator'S Manual Download Page 79

Page: 79 / 162

Lighthouse Worldwide Solutions

ApexZ Operators Manual

248083466-1 R6

User Options

Enable Users

(enable/disable)

Press the Enable Users button and go
directly to the Login Screen.

Enable Guest Account

(enable/disable)

Press to enable guest account and then a
guest user will be permitted to login
without a password and will be assigned a
“user” level access.

Auto Lock

(enable/disable)

Press to enable Auto Lock and
automatically lock the screen after the
timeout period.

Timeout

Enter the timeout period to lock the screen
when auto lock is enabled.

Include Sample Time

(enable/disable)

If Include Sample Time is enabled then the timeout timer will countdown during idle screen time or while
sampling. If “Include Sample Time” is disabled then the timeout timer will not count down during a sampling
session.

Unlock screen from Auto Lock

Press the User Button to unlock user screen.

Then select
-

Switch User (new login required)

Unlock (password required)

Cancel (remain locked)

Instrument Options Enable Users

Home Screen - Auto Locked

Note:

All buttons disabled during auto lock.

Summary of Contents for ApexZ Series



































































































































































Search results

Summary of Contents for ApexZ Series

Reviews:

Related manuals for ApexZ Series

Brands by name

Popular brands

Lighthouse ApexZ Series, Operator'S Manual

Search results

Summary of Contents for ApexZ Series

Reviews:

Related manuals for ApexZ Series

Brands by name

Popular brands