Lighthouse ApexZ Series Operator'S Manual Download Page 76 | Manualshive

Page: 76 / 162

background image

Lighthouse Worldwide Solutions

ApexZ Operators Manual

248083466-1 R6

68

Audio/Visual

Volume

Touch and slide the volume button from 0 – 100%.

Brightness

Touch and slide the brightness button 0 – 100%.

Language

Press the Language button to display the Select Language screen.
Select the desired language.

Press the green save button.

Decimal Mark

Press the Decimal Mark button to display the
Select Decimal Mark screen.
Select period or comma.
Then press the green save button.

Digit Group

i

ng

Press the Digit Grouping button to display the
Select Digit Separator screen.
Select none, space, comma or period.
Then press the green save button.

Instrument Audio/Visual Screen

Select Digital Grouping Screen

Note

:

Enabled Alarms will always sound at 100%.

volume.

Select Decimal Mark Screen

Select Language Screen

Warning:

Changing the instrument language will update the instrument firmware and the

printer. It will take 1-2 minutes for the update to complete. During this time make sure the
ApexZ instrument has at least 50% battery life remaining or connected to the AC adapter and
do not turn off the instrument while updating. Failure to follow these instructions could
cause the printer to become damaged and unusable.

«
...
74
75
76
77
78
...
»

Summary of Contents for ApexZ Series



































































































































































Reviews:

No comments

Related manuals for ApexZ Series

Brand: JCM GLOBAL Pages: 24

Brand: Olympia Pages: 16

Brand: Olympia Pages: 60

Brand: Safescan Pages: 24

Brand: OfficeMaster Pages: 15

Brand: Nautilus Hyosung Pages: 31

Brand: Sam4s Pages: 310

Brand: Olivetti Pages: 38

Brand: CEBEK Pages: 8

Brand: SINO Pages: 12

KCT1-6WR/RS232-V

Brand: Pepperl+Fuchs Pages: 44

Brand: Kuebler Pages: 24

Hengstler tico 734

Brand: impulse Automation Pages: 4

HENGSTLER tico 731.2

Brand: impulse Automation Pages: 6

Brand: Elo Touch Solutions Pages: 23

Brand: ARCHEAN Pages: 12

Brand: Avery Weigh-Tronix Pages: 28

Brand: Avery Weigh-Tronix Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands