Auto-Mate/DMX™
Controls and Functions
Auto-Mate/DMX™
Controls and Functions
1
10
9
8
7
6
5
4
3
2
12
11
©
LSC Supply
®
- www.lightstreamcontrols.com - Auto-Mate/DMX™ Instruction Manual Page 8
©
LSC Supply
®
- www.lightstreamcontrols.com - Auto-Mate/DMX™ Instruction Manual Page 7
1. Power Switch -
This switch turns on the unitʼs main power.
2. Power Indicator -
This yellow LED will glow when main power is activated. This LED will
flash briefly when program mode is activated.
3. Microphone -
The unit comes with a built-in microphone designed to pick-up on low
frequencies. The unit then uses this signal to trigger program succes-
sion.
4. Audio Sensitivity Knob -
This knob is used to adjust the unitʼs sensitivity to sound. When the
knob is turned in a clockwise direction, the unit becomes more sensi-
tive to sound, when this knob is turned in a counter-clockwise direction
the unit becomes less sensitive to sound. Usually the more sensitive to
sound the unit is, the faster the programs will chase.
5. Function Button -
This button is used to change the functionality of the Audio/Prog 1,
Strobe/Prog 2, Fast/Prog 3, and Slow/Prog 4 Buttons. Engaging the
function button will allow the “Audio,” “Strobe,” “Fast,” and “Slow” modes
to operate. The red function LED will glow when function level two is
active.
6. Audio/Prog 1 Button -
This button serves two functions. When the function level two is
engaged, this button will activate sound-active mode. When the function
level one is engaged, selecting this button will active the program stored
in this bank.
7. Strobe/Prog 2 Button -
This button serves two functions. When the function level two is
engaged, this button will activate strobe mode. Strobe mode will initiate
a strobe function to any program running. When the function level one
is engaged, selecting this button will active the program stored in this
bank.
8. Fast/Prog 3 Button -
This button serves two functions. When the function level two is
engaged, this button will activate the first bank of four programs. When
the function level two is engaged, selecting this button will active the
program stored in this bank.
9. Slow/Prog 4 Button -
This button serves two functions. When the function level two is
engaged, this button will activate the second bank of four programs.
When the function level two is engaged, selecting this button will acti-
vate the program stored in this bank.
10. Blackout Button -
This button activates blackout mode. In blackout mode all fixture actively
will enter into stand-by mode - No light output - No mirror movement.
11. DMX Output Jack -
This jack sends the controllers DMX signal to your fixtures. This jack
uses a standard 3-pin XLR female connector.
12. Power Supply Input Jack -
Only connect a recommended power supply AC 9v~12v, 250mA. Use of
a power supply other than a recommend power supply could damage
your unit and will void your manufactures warranty.