background image

1-YEAR LIMITED WARRANTY

A.  LSC

®

 hereby warrants, to the original purchaser, LSC

®

 products to be free of manufac-

turing defects in material and workmanship for a period of 1 Year (365 days) from the date 

of purchase. This warranty shall be valid only if the product is purchased within the United 

States of America, including possessions and territories. It is the ownerʼs responsibility to 

establish  the  date  and  place  of  purchase  by  acceptable  evidence,  at  the  time  service  is 

sought. 
B.  For warranty service, send the product only to the LSC

®

 factory. All shipping charges 

must be pre-paid. If the requested repairs or service (including parts replacement) are within 

the terms of this warranty, LSC

®

 will pay return shipping charges only to a designated point 

within the United States. If the entire instrument is sent, it must be shipped in its original 

package. No accessories should be shipped with the product. If any accessories are shipped 

with the product, LSC

®

 shall have no liability whatsoever for loss of or damage to any such 

accessories, nor for the safe return thereof.  
C.  This warranty is void if the serial number has been altered or removed; if the product is 

modified in any manner which LSC

®

 concludes, after inspection, affects the reliability of the 

product; if the product has been repaired or serviced by anyone other than the LSC

®

 factory 

unless prior written authorization was issued to purchaser by LSC

®

; if the product is dam-

aged because not properly maintained as set forth in the instruction manual. 
D.  This is not a service contract, and this warranty does not include maintenance, cleaning 

or periodic check-up. During the period specified above, LSC

®

 will replace defective parts at 

its expense, and will absorb all expenses for warranty service and repair labor by reason of 

defects in material or workmanship. The sole responsibility of LSC

®

 under this warranty shall 

be limited to the repair of the product, or replacement thereof, including parts, at the sole 

discretion of LSC

®

. All products covered by this warranty were manufactured after January 

1, 1990, and bear identifying marks to that effect. 
E.  LSC

®

 reserves the right to make changes in design and/or improvements upon its prod-

ucts without any obligation to include these changes in any products theretofore manufac-

tured. 
F.  No warranty, whether expressed or implied, is given or made with respect to any acces-

sory supplied with products described above. Except to the extent prohibited by applicable 

law, all implied warranties made by LSC

®

 in connection with this product, including warran-

ties of merchantability or fitness, are limited in duration to the warranty period set forth above. 

And no warranties, whether expressed or implied, including warranties of merchantability 

or fitness, shall apply to this product after said period has expired. The consumerʼs and or 

Dealerʼs sole remedy shall be such repair or replacement as is expressly provided above; 

and under no circumstances shall LSC

®

 be liable for any loss or damage, direct or conse-

quential, arising out of the use of, or inability to use, this product. 

 

G.  This warranty is the only written warranty applicable to LSC

®

 Products and supersedes 

all  prior  warranties  and  written  descriptions  of  warranty  terms  and  conditions  heretofore 

published. 

 Auto-Mate/DMX™  

 

 

 

      Warranty

  Auto-Mate/DMX™  

 

 

 

       Cleaning

Due to fog residue, smoke, and dust, cleaning the unit should be car-
ried out periodically to optimize light output. 

 

1.   Use normal glass cleaner and a soft cloth to wipe down the outside 

      casing.

2.   Use a  cleaner  specially  designed  for  electronics to  spray in  and 

      around the knobs and switch. This will reduce small particle built up 

      that can effect the proper operation of the controller. 

3.   Clean should be carried out every 30-60 days.

4.   Always  be  sure  to  dry  all  parts  completely  before  plugging  the 

      unit in.

Cleaning frequency depends on the environment in which the fixture 
operates (i.e. smoke, fog residue, dust, dew).

 Auto-Mate/DMX™  

 

 

       Warranty Card

The  Auto-Mate/DMX™ carries a one year limited warranty. We recom-

mend you fill out the enclosed warranty card to validate your purchase. 

All  returned  service  items  whether  under  warranty  or  not,  must  be 

freight pre-paid and accompany a R.A.(return authorization) number. 

If  the  unit  is  under  warranty,  you  must  provide  a  proof  of  purchase 

invoice. You  may  obtain  a  R.A.  number  by  contacting  our  customer 

support team on out toll free number.

©

LSC Supply

®

  -  www.lightstreamcontrols.com  - Auto-Mate/DMX™ Instruction Manual Page 22

©

LSC Supply

®

  -  www.lightstreamcontrols.com  - Auto-Mate/DMX™ Instruction Manual Page 21

Summary of Contents for Auto-Mate/DMX













Reviews: