![background image](http://html1.mh-extra.com/html/light-my-bricks/75953/75953_manual_1911523078.webp)
Turn the AA Battery Pack ON to test all the lights are working OK.
Note: If you experience any issues with the lights not working and suspect an issue with a
component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please
view the section addressing expansion board issues on our online troubleshooting guide.
This finally completes installation of the Light My Bricks LEGO Hogwarts Whomping Willow
Lighting Kit.
If you experience any issues during this installation, please refer to our online
troubleshooting guide. If you have any other issues or questions please email the customer
service team: [email protected]
We thank you for purchasing this product and hope you enjoy!
Summary of Contents for 75953
