Connecting cable connectors to Expansion Boards
Take extra care when inserting connectors to ports of Expansion
Boards. Connectors can be inserted only one way. With the expansion
board facing up, look for the soldered “=” symbol on the left side of the
port. The connector side with the wires exposed should be facing
toward the soldered “=” symbol as you insert into the port. If a plug
won’t t easily into a port connector, do not force it.
WARNING: Incorrectly inserting the connector can
result in bent pins inside the port or possible
overheating of the expansion board when connected.
Installing Bit Lights under LEGO
®
bricks and plates.
When installing Bit Lights under LEGO
®
pieces, ensure they are placed
the correct way up (Yellow LED component exposed). You can either
