35
4.5.2
Assembly of the trolley with two connecting bolts
The two trolley connecting bolts are to be fixed to the lateral boards so as to allow a clearance of one to
two millimetres between the running wheel flange and the girder flange. The width is adjusted by
inserting spacing washers
symmetrically
. The suspension eye is mounted between the spacing
bushes on the trolley connecting bolts.
Tighten the nuts of the connecting bolts with a torque wrench.
Hexagon nuts
Tightening torque (Nm)
M16×1.5
75 Nm
M22×1.5
150 Nm
M36×1.5
560 Nm
Table 7: Tightening torques
Figure 34: Flexibility between chain hoist and trolley
Caution!
Movement in the directions shown by the arrows must be possible between the hoist and
the trolley when assembly is complete.
The suspension eye must be selected in accordance with the particular type of chain hoist
and the assembled trolley (flange width).
4.5.3
Assembly of the trolley with tandem trolley
Tandem trolley
Strainer strap
Figure 35: Electric chain hoist with tandem trolley
Caution!
Tandem trolleys are not suitable for trolleys with one suspension bolt.
Tandem trolleys are not suitable for curved beams.
Summary of Contents for STAGEKET
Page 55: ...55 13 Example of Declaration of Conformity...
Page 56: ...56 14 Example of Declaration of Incorporation...
Page 57: ...57...
