6
1.2
1.2
• Make sure the
Pole Alignment Stickers
are on the same side of the Pole assembly as the Pole Bracket. Slide the
Top Pole (ALH)
onto the
Middle Pole (ALF)
as shown.
• In order to seat the Poles, strike the end of the Pole
very hard fi ve to six times on a piece of scrap wood.
The
Top Pole (ALH)
should come down until it covers
the 4.5-inch pencil mark at the top of the
Middle
Pole (ALF)
. It must go no further than the 5-inch
mark. If the Top Pole does not cover the 4.5-inch
mark at the top of the Middle Pole after seating,
DO
NOT COMPLETE ASSEMBLY
. Call our Customer Service
Department.
TOOLS AND HARDWARE REQUIRED
1.3
1.4
X
SECTION 1 (CONTINUED)
ALH
ALF
(1)
6x
ATTENTION: THIS STEP CANNOT BE REVERSED!
• Do not strike your feet with the
Pole sections, as serious injury
may occur.
!
WARNING
The Poles must be seated together! Even if the
Poles cover the slots before seating, they must be
struck on a hard surface five to six times! Failure
to seat the Poles correctly could allow the Poles to
separate during use, which could lead to serious
personal injuries or property damage.
!
Alignment sticker
