11
TOOLS AND HARDWARE REQUIRED
X
SECTION 2 (CONTINUED)
2.1
• Slide one end of the
Long Axle (GDD)
through two
Wheels (AMU)
and one
Base Frame Tube (GDG)
. Position the parts as
shown, with one Wheel on each side of the Base Frame Tube.
2.2
• Slide the Axle through the hole at the bottom of the
Bottom Pole (ALE)
. Make sure the Pole is oriented as shown,
with the
Pole Bracket (ALL)
facing up. Next, slide two
Wheels (AMU)
and a Base Frame Assembly onto the Axle in the
order indicated.
AMU
AMU
GDD
AMU
AMU
ALL
ALE
GDG
• Make sure the Pole is oriented as shown,
with the Pole Bracket (ALL) facing up.
!
