CLEANING INSTRUCTIONS
Honeycomb shades are made of an anti-static, dust resistant fabric which repels dirt and dust. For most of
these fabrics, the following options are available if your shade needs cleaning.
DUSTING: Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
VACUUMING: Use a hand-held vacuum with low suction for thorough dust removal.
SPOT CLEANING: Use these steps for spot cleaning: (1) Prepare a solution of warm water and mild
dishwashing detergent. (2) Dampen a clean cloth in the solution and ring it out. (3) Dab the spot with the
dampened cloth until it is gone. DO NOT RUB THE FABRIC. (4) Allow the shade to dry in the completely
lowered position.
CAUTION: Avoid creasing Serenity or Opulence Blackout fabrics during cleaning.
DEEP CLEANING: Use the following steps for deep cleaning: (1) Immerse shade in basin or bathtub filled
with warm water and mild detergent. (2) Rinse with clean water. (3) Fully raise shade and tilt to eliminate
excess water, (4) Reinstall damp shade, lower it, and let it dry completely.
CAUTION: Do not immerse Serenity or Opulence Blackout fabrics. Do not immerse headrail in water.
ULTRASONIC CLEANING: Standard shades, except those made with Serenity or Opulence Blackout can
be ultrasonically cleaned by a professional.
Specify that a mild detergent be used.
Never immerse the headrail in the solution.
Dry the shade completely in the lowered position.
CAUTION: Do not ultrasonically clean Serenity or Opulence Blackout fabrics.
