USER
MANUAL
25
51335-006
EEG System
Connections, ports and controls
Electrode Input connectors
R40: 52 Touchproof 1.5mm
R40 (24) 34 Touchproof 1.5mm
E-cap connector
1 Standard 25-pin D socket
Aux DC Inputs
2 Jack socket 3.5mm (Channels 39 and 40)
Patient Event Input
1 Jack socket 3.5mm
Front-panel push-buttons
1 push-button Impedance Check –
1 push-button Impedance Check +
Host PC Connector
1 RJ45 socket providing USB port (isolated from patient)
Nonin Xpod (SaO2)
1 Binder 710 series 3-pin socket
LED indicators
Impedance Check Indication (1 per channel). R40: 40 LEDs, R40 (24): 28 LEDs
5 LEDs for Impedance Check Level, 1 LED for Power On, 1 LED for Wireless operation
Micro-SD card port
1 Micro-SD socket
Internal Battery
1 type LIR2450 Lithium-ion rechargeable Coin cell
Internal beeper
Physical characteristics
Weight
400g
Size
17cm x 11cm x 4cm
Safety and EMC standards
The system has been certified and complies with the following standards:
IEC 60601-1 and
IEC 60601-2-26
International standard for medical electrical equipment, general requirements and
particular requirements for EEG systems.
ANSI/AAMI ES 60601-1
AAMI Deviations from IEC 60601-1 (USA).
CAN/CSA 22.2 No 601.1 M90
Canadian standard for medical electrical equipment, general requirements.
IEC 60601-1-2
International standard for medical electrical equipment, EMC requirements, calling:
*CISPR11
Conducted Emissions, Group 1, Class B
CISPR11
Radiated Emissions, Group 1, Class B
IEC61000-4-2
Electrostatic Discharges
IEC61000-4-3
Immunity - Radiated RF Field
*IEC61000-4-4
Immunity - Transients Bursts
*IEC61000-4-5
Immunity – Surges
IEC61000-4-6
Immunity – Conducted
IEC61000-4-8
Immunity – Power frequency fields
*IEC61000-4-11
Immunity – Voltage dips, interruptions
*IEC61000-3-2
Harmonic Emissions
*IEC61000-3-3
Voltage Fluctuations/flicker
*Note: Compliance is provided by the PC
Appendix 1
Summary of Contents for neuro R40
Page 1: ...USER MANUAL EEG System ...
