11
TROUBLE SHOOTING GUIDE
1. Verify that all the bolts and nuts are locked properly and the turning parts should be
turned freely without damaged parts.
2. Clean the equipment with soap and slightly damp cloth only. Please do not use any
solvent to clean the equipment.
Problem Potential
Cause
Corrections
Base is unstable.
1. Floor is not flat or there is
small object under the front or
rear stabilizer.
2. The adjustable levelers on
the rear stabilizer have not
been leveled when adjusting.
1. Remove the object.
2. Adjust the adjustable levelers.
Handlebar or seat
post is shaking.
The T-Knob or locking knob is
loose.
Tighten the T-Knob or locking knob.
Loud noise from
the moving parts.
The interval of the parts is
improper tighten.
Open the covers to adjust.
No resistance when
riding the upright
bike.
1. The interval of the magnetic
resistance increases.
2. Tension control knob is
damaged.
3. Belt
slips.
4. The bearing set is damaged.
1. Open the covers to adjust.
2. Change the tension control knob.
3. Open the covers to adjust.
4. Change the bearing set.
