LifeFitness MJ-CORE, Owner'S Manual

Page: 71 / 76

68
Cable Tensioning
Check Cable Tension
1.
Cable should have enough tension so it stays seated in the pulley but not so tight that it lifts the headplate off the
weight plate below it.
ITEM # DESCRIPTION
1 Headplate Assembly
2 Weight Plate
If this occurs, loosen the jam nuts at the terminations and loosen the threaded plugs a half turn until the headplate
comes to rest on the weight plate below. Check that the threaded plugs are engaged at least 1/2” (12.7mm) at each
termination.
Strain-Relief Ends
Assembly
1.
Assemble Strain-Relief cable ends to cable assembly.
ITEM # DESCRIPTION QTY.
1 Cable Assembly 1
2 Allen Screw 2
3 Housing 1
4 Insert 1
5 Link 1
25-30 FT-LBS.
(27-34 Nm)