LifeFitness MJ-CORE, Owner'S Manual

Page: 11 / 76

8
ONCE A DAY
1. Wipe down upholstery with a mild soap and water or comparable all purpose cleaner.
2. Visually inspect cables for wear at and around connections and along the entire length of the cable. Always replace
at first sign of wear.
ONCE A WEEK
1. Check all hardware for loosening, tampering or wear.
2. Check jam nut at top of weight stack for tightness.
3. Inspect all accessories, connecting links, and carabiner clips for wear.
4. Check condition of hand grips.
5. Check cables for stretch and adjust as necessary by loosening the large Jam Nut on top of the weight stack and by
screwing in the threaded-plug until cable is tight and the weight stack pin goes in all holes easily.
6. Inspect shrouds for damage and clean as necessary.
ONCE A MONTH
1. Clean Guide Rods with Break-Free® brand lubricant (part number SK50-P0005-0000). Clean tops of bearings at
stack and inspect for heavy buildup on rods below the head plate. Lift half of stack and do a visual inspection, then
clean as necessary.
2. Inspect hardware on all machines and tighten any bolts or nuts that may have loosened over the life of the product.
NOTES
Use automotive wax to remove shoe scuffs from powder coated surfaces as necessary.
CLEANING THE SHROUDS
Adherence to regular and proper cleaning procedures is recommended to preserve the appearance.
MINIMIZE SCRATCHES
Wash the shrouds with an approved or compatible cleaner. Do not scrub brushes on the shrouds. Fresh paint splashes,
grease and smeared glazing compounds can be removed easily before drying by rubbing lightly with isopropyl alco-
hol. Afterward, a warm final wash should be made.