LifeFitness MJ-CORE, Owner'S Manual

Page: 10 / 76

7
4
Maintenance Schedule
ACTION
ACTION DAILY WEEKLY MONTHLY AS NEEDED
CLEAN
Upholstery X
Guide Rods X
Shrouds X
Hand Grips X
WAX
Frames X
INSPECT
Accessories X
Cables X
Frame X
Hand Grips X
Hardware X
Jam Nuts X
Paint X
Shrouds X
LUBRICATE
Guide Rods X
CLEAN...
• Upholstery with an approved or compatible cleaner.
• Guide Rods with a cotton cloth.
• Shrouds with a cotton cloth.
• Hand Grips with an approved or compatible cleaner.
WAX...
• Frames with a standard, non-abrasive, wax finish.
INSPECT...
• Accessories. Check every component of the accessory, especially stitching; replace at first sign of damage.
• Cables. Look for minimum depth engagement, wear or damage and proper tension. Pay close attention at bends
and attachment points. Refer to Cable Handling Guide within this manual for more information.
• Frame. Inspect for ear and damage.
• Hand Grips. Check for wear and damage.
• Hardware. Check for loosening. Tighten as required.
• Jam Nuts. Ensure tight at all terminations. Refer to Cable Handling Guide within this manual for more information.
• Paint. Fill paint chips in immediately with Life Fitness touch-up paint.
• Shrouds. Look for wear and damage.
LUBRICATE...
• Lubricate guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000). Apply the lubricant to
a cotton cloth, and then run the cotton cloth up and down the guide rods as needed. NOTE: only a few drops of
lubricant are required for each guide rod.