8
STEP 7:
FIGURE 7
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
3/8 X 4-1/2” 52
11
33
25
4
10
20 3/8 X 2-3/4”
LIGHTLY
TIGHTEN!
53
• Slide one PILLOW BLOCK (33) over the shaft on the RIGHT PIVOT ARM (4.
•
LOOSELY
assemble one 4-1/2” PULLEY (10) to the middle rectangular tube on the RIGHT PIVOT ARM (4) using one 3/8 X 2-
3/4” BOLT (20), one CABLE CLIP (53) and one 3/8” LOW HEIGHT LOCK NUT (25) as shown in FIGURE 7.
•
LOOSELY
assemble one 4-1/2” PULLEY (10) to the bottom rectangular tube on the RIGHT PIVOT ARM (4) using one 3/8 X 4-
1/2” BOLT (52), one CABLE CLIP (53) and one 3/8” LOW HEIGHT LOCK NUT (25) as shown in FIGURE 7.
• Assemble two 1 X 1” GLIDES (11) to the top of the L-brackets on the RIGHT PIVOT ARM (4) as shown in FIGURE 7.
4a
4c
4b
57
4d
58
