6
STEP 3
:
FIGURE 3
•
Securely tighten all loose frame connections made to this point, then proceed to snap RH
CAPS (48) over the RH WASHERS (28) on all tightened connections.
7
48
20 3/8 X 2-3/4”
28
27
25
3
•
LOOSELY
assemble the CROSS BRACE (3) to the SEAT FRAME (7) and the TOWER (1) using eight RH CAPS (48), four 3/8 X
2-3/4” BOLTS (20), eight 3/8” SAE WASHERS (27), eight 3/8” RH WASHERS (28) and four 3/8” LOW HEIGHT LOCK NUTS
(25) as shown in FIGURE 3.
1
20 3/8 X 2-3/4”
STEP 4:
FIGURE 4
•
SECURELY
assemble the SEAT PAD (44) to the SEAT FRAME (7) using two RH CAPS (48), two 3/8 X 1” BOLTS (18) and two
3/8” RH WASHERS (28) as shown in FIGURE 4.
18 3/8 X 1”
28
48
44
7
