LifeCore Fitness VST-V8, User'S Product Manual

Page: 8 / 29

Page | 7
Step 3: (L) Side Supporting Tube Assembly and
Main Frame Assembly
Note: For SAFETY REASONS: Additional
assistance may be needed to help lift main frame
assembly to the upright position.
A. After assembling the right side supporting tube
assembly, raise the main frame (A) to the upright
position.
B. Remove the styrofoam pieces (#3 & #4) as show
on the diagram.
C. Assemble the left side supporting tube assembly
onto the main frame the same way as the right
side supporting tube assembly. Please refer to
steps 1 & 2 for assembly procedure.
Step 4: (R) Pedal Supporting Tube Assembly
Tools Needed:
13mm wrench
6mm Allen wrench
Note: Use page 5 as a reference to help
distinguish correct bolts for assembly. Additional
assistance may be needed.
A. As shown in View D) Connect the right pedal
supporting tube (B2) to main frame (A). Use the
tools provided to tighten (J3) bolt M8x67 and (J4)
nut M8.
B. As shown in View E) Connect and align the right
lower pedal supporting tube (B5) to the front
pedal supporting tube on the main frame (A). Use
the tools provided to tighten (J5) bolt M8x105,
(J9) washer M8x16x2T and (J4) nut M8 firm, but
DO NOT OVER Tighten.
C. As shown in View F) Tighten the preinstalled (J5)
bolt M8x105 and (J4) nut M8 firm, but DO NOT
OVER Tighten.
D. Repeat the previous same steps for the left pedal
tube assembly (B1 & B2).