LifeCore Fitness VST-V8, User'S Product Manual

Page: 5 / 29

Page | 4
Assembly Instructions
Assembly Tips
The LifeCORE VST-V8 is made from the best materials and has been tested and received a quality
control review prior to its packaging to ensure the correct parts and proper fitting of each component.
This machine was designed to limit the amount of assembly needed by a consumer.
Before assembling your product, distinguish a proper and appropriate location for the unit where there
is easy access to an electrical outlet with a surge protector. Read the assembly instructions first before
unpacking the box in a clear work area to allow for smooth assembly. Remove all of the parts from the
packing material; however, do not discard packing material until assembly is complete. Double check
the packing materials to ensure no missing parts were left behind.
Note that some hardware may be preassembled to components in order to help with assembly; tools
have also been provided to assist with assembly. If you are missing any parts, assembly bags or need
assistance with assembly please call LifeCORE Fitness at 1-888-815-5559.
Getting Started
NOTE: Please follow all direction very carefully for proper installation.
A. Lay the box down flat so that the lid is able to be lifted. Unpack the handle bars, side supporting
tubes, pedal supporting tubes and owners manual. Remove the top styrofoam pieces #1 & #2 and
finish up packing the console, central supporting tube and hardware bag, leaving the main the
frame (A) and bottom styrofoam pieces #3 & #4 inside the box until instructed to remove them.
B. Note: FOR SAFETY REASONS, DO NOT turn the pedal locking feature knob to the unlock position
until instructed to do so at the end of the assembly.