10
|
P a g e
Assembly Figure 5
FIGURE 5
Tools Needed:
Philips screw driver: 2E3E
17mm socket wrench: 2JAX
17mm wrench: 2JAW
Tube of Grease: 2K81
Note:
It is recommended that two
adults help align and secure the pedal
tube assemblies to the handrail
assemblies.
Note:
Rub assembly grease on pivot
points prior to connecting arms.
¾
Locate bag labeled
Figure 5
.
¾
(
See Figure 5
) Locate right pedal
tube assembly. Secure pedal tube
assembly to the handrail assembly
with Qty. one M10x1.5-81.5 hex
bolt and Qty. one M10x1.5 hex
nut. Using the 17mm socket
wrench and 17mm wrench,
tighten bolt and nut snug (Not Too
Tight).
¾
Please ensure that pedal arm is
aligned in the center of roller
wheel while tightening M10x81.5
bolt. Repeat same steps for left
side.
Note:
Do not over tighten M5x0.8-12
screw, this will damage bracket cover.
¾
Locate bracket covers.
¾
(
See Figure 5
) Attach bracket
cover to the handrail assembly by
lining up the hole and screwing
Qty. one M5x0.8-12 screw into
handrail assembly with a
Philips
screw driver. Repeat for other
side.
Figure 5A
Summary of Contents for LC-CD600
Page 2: ...2 P a g e...
Page 29: ...2 29 P a g e...
