Page | 11
Congratulations!
You have completed assembly of your CD400 Elliptical
Step 11:
Tools Needed:
Philips screw driver: 2JAY
1) Locate bag labeled
Figure 11.
2) (
See Figure 11
) Secure bottle holder to
console tube using Qty. two M5x0.8-12
screws. Use a Philips screw driver to
tighten.
Plug the AC adaptor into a power outlet and
into the machine. The AC inlet is located on
the user left side of the machine. Only a
DC
9V 1000mA
that comes with the unit should
ever be used to power the machine.
Once assembly is complete; if needed, tighten
or loosen the levelers on the bottom with a
17mm wrench: 2JAW to prevent the machine
from wobbling and to make the machine
stable. Tighten the leveler nut on top of the
lever to prevent them from moving.
