Page | 10
Step 9:
Tools Needed:
4mm Allen wrench: 0J3P
Note:
Ensure that all wires are properly
connected inside console tube. Be careful to
not
pinch wires
. Addition help maybe needed
to help line up holes to frame.
1) Locate bag labeled
Figure 9
.
2) (See
Figure 9
) Connect the pulse wires
coming
from
the
pulse
handlebar
assembly into the pulse wires from the
console tube.
3) Secure the pulse handlebar assembly to
the console tube by screwing Qty. six
M6x10 hex socket head bolts into frame.
Using a 4mm Allen Wrench, tighten bolts.
Step 10:
Tools Needed:
Philips screw driver: 2JAY
1) Locate bag labeled
Figure 10.
2) Locate black pivot covers.
3) (
See Figure 10
) Connect the left side two
pivot covers on to the handlebar
assembly. Using a Philips screw driver,
tighten Qty. two M4x16-10 screws from
the front of machine.
4) Connect the right side two pivot covers
and tighten screws from the back of
machine.
