Page | 6
Step 4: Central Support Tube Cover Assembly
Tool Needed:
Screw driver
(
See Figure 4)
Connect the decoration covers (K6-L & K7-R) to the front of the main frame.
Using a screw driver, tighten screws (K3) to secure covers together.
Step 5: Front Handle Bar Assembly
Tool Needed:
13mm wrench
Note: Additional assembly help maybe needed.
1) Remove the nut (E9) and washer (E8) from the handle bar.
2) (
See Figure 5
) Joint the hand bar assembly to the central support tube using the same
washer and nut; using a 13mm wrench to tighten them.
Figure 4
Figure 5