Page | 5
Step 2: Front Stabilizer Assembly
Tool Needed:
6mm Allen wrench
Note: Apply blue loctite to the threads of
each bolt.
(
See Figure 2
) Attach the front stabilizer (C)
to the main frame with bolts (K1) and
washers (K2), using a 6mm Allen wrench to
tighten them.
Step 3: Central Support Tube Assembly
Tool Needed:
6mm Allen wrench
Note: Additional assembly help maybe
needed.
1) Remove bolts (D4) and washers (D5)
from the central support tube (D).
2)
(See Figure 3)
Locate and connect
cable (D2) with cable (A8) together,
make sure connections are joined
properly.
Note: Be careful not to pinch wires while
joining the two parts.
3) Apply blue loctite to the threads of each
bolt.
4) Place the central support tube (D) on the
main frame and secure it with bolts (D4)
and washers (D5) to tighten the central
support tube. Use a 6mm Allen wrench
to tighten them.
Figure 2
Figure 3
