Page | 13
2.
DISPLAYS
a.
Dot matrix profile window
:
Displays program profile during program setting and executing. The program profile will be different
according to which program is selected.
There are 15 columns of LED representing 15 segments of time; each segment time
=
total program
time divided by 15 columns. During exercising, a column of LED will blink to indicate the time
segment you are currently in and show your workout progress.
There are also 8 rows of LED representing 16 levels of resistance. Each row represents 2 levels of
resistance. The appropriated row of LED will light up when you adjust the resistance level.
b.
Data display windows
:
There are 6 data display windows displaying calories, time, speed/rpm, pulse, distance and
watt/level. During program setting, the appropriated data window will blink to indicate which data you
are setting currently. Press
/
keys to adjust the value and ENTER key to confirm the value.
Note:
i.
During data displaying, speed/RPM window will display speed & RPM each for 5 seconds;
switch back & forth. Same as watt/level display.
ii.
The default value setting will be updated to the last setting if it has been changed. Pressing &
holding RESET key for a couple of seconds will reset them back to factory defaults.
iii.
Setting a number besides 0 in those slots will count the number down. If it’s set at 0 it will
count up.
c.
User profile setting indicators
:
During user profile setting, each LED will light up to indicate which setting is selected. Press ENTER
key to confirm selection or
/
key to change the selection.
d.
Program category selecting indicators
:
During program category selection, each LED will light up to indicate which category is selected.
Press ENTER key to confirm the category selection or
/
key to change the selection. There are 5
program categories: manual, program, watt, user setting and H.R.C.
e.
H.R.C. program indicators
:
During H.R.C. program selection, each LED will light up to indicate which H.R.C. program is selected.
Press ENTER key to confirm the program selection or
/
key to change the selection. There are 4
H.R.C. programs: TAG (target), 90%, 75% & 55%.
Note: Display sleep mode: If there is no sufficient power to the console, the display will shut
down and enter “sleep” mode. Previous activities will be stored for 2 minutes. To resume,
simply pedal again. If no power for more than 2 minutes, the console will be reset and
previous activities will be lost, except for the saved User information.
