www.LifeIonizers.com/Support
19
75
M11/M11 UC NG
37
Operation Warnings / Error Messages
Error Codes
E1 : Water flow from ionizer is too low
If the following error messages appear on the LCD screen,
be sure to contact our technical support at 866.321.3116.
E2 : Water flow from faucet is too high
• Improper use may cause structural damage to the unit or physical injury.
• Do not make any adjustments after F60 in the mode menu.
• Do not place anything on the unit.
• Disassemble the alkaline water outlet pipe (power set hose) before
picking up the unit. Failure to do so may cause the hose to break
which will result in water leakage.
• Water drain outlet should not be closed.
• Be sure to check the electric power 110V/220V prior to use.
• In case of malfunction, contact LIFE Ionizers® Technical Support at
760.585.1692.
• Do not use hot water as the ionizer is meant for cool water only.
• Unplug the electric power when not in use for a long time (over 3 days).
• Do not use underground water, polluted water or metallic water.
• Do not use water with a temperature of over 35° Celcius/ 95° Fahrenheit
as it may cause damage or short filter life (Room temperature is best).
• Do not use pre-ionized water.
• Do not clean the unit with alcohol.
• Only use certified replacement filters.
• Be careful not to shake or drop the unit.
www.LifeIonizers.com/Support
Summary of Contents for M11
Page 1: ......
Page 50: ...revised 5 6 15 ...