Simple to use:
Find your fixed LEFT edge.
Using the palm of your hand, turn
the center cap to the right until it
stops. Then turn it to the left until it
stops. This is your fixed left edge.
Arc is preset to rotate 180º.
Adjusting the Pattern.
Using a screwdriver, adjust the
arc dial clockwise (+) to increase
the arc or counterclockwise (-)
to decrease the arc. Pattern is
adjustable from 40º to 360º.
Do not turn past right or left
stop. Adjust wet or dry.
Adjusting the Radius.
Using a screwdriver, turn radius-
reduction screw to reduce radius
up to 35%. Adjust wet or dry.
32SA POP-UP
GEAR DRIVEN ROTOR
“SA” for Simple Adjust
“SA” for Simple Adjust
Replaces
competive
product such as
Orbit
©
Saturn III
™
Pressure PSI
25
35
45
55
Radius ft.
29
31
31
32
Flow GPM
2.17
2.60
3.00
3.25
3.0 Pre-Installed Nozzle* Performance Chart
SPRAYS 19 TO 32 FEET
ADJUST FROM 40-360º
READY FOR INSTALLATION
SPRAYS 19 TO 32 FEET
ADJUST FROM 40-360º
READY FOR INSTALLATION
1/2” INLET
1/2” INLET
*Rain Curtain
™
Nozzle Technology
for even water distribution
