Hydro-Rain HRX-075 Sprinkler Rotor
Sprinkler Installation
Please Note: Do Not use pipe dope on threads! Use thread seal tape
if
necessary.
1. Flush sprinkler lines.
2. Thread the sprinkler rotor onto a swing joint assembly and set the head flush with the
finished turf height.
Set the Spray Distance after installation
Please Note: Set with water on at normal system operating pressure. Nozzle #2 is preinstalled
and adjusts from 25 - 45 feet depending on your water pressure.
1. Insert the metal hex end of the adjusting key into thew distance adjustment slot.
2. Turn clockwise to decrease distance or counter-clockwise to increase distance.
*Caution: Do Not turn the adjustment screw too far in either direction as the screw may come
loose from threads.
