51
PULLEYS AND LOW CABLE INSTALLATION
NOTE: It is recommended to have a second person to help you to assemble the
pulleys and low cable.
Step 1
Route the Low Cable (87) upward through the Leg Extension Tube (8).
Attach the Pulley (19) inside the Leg Extension Tube (8), above the Low Cable (87), with
one M10x70 Hexagon Head Bolt (76), one M10 Nylon Lock Nut (83), two Pulley Bushings
(54), and two Ø10 Flat Washers (65). Tighten bolt and nylon lock nut with two 14-17
Double Open End Wrenches provided.
PLEASE REFER TO THE “LOW CABLE LOOP DIAGRAM” SECTION ON
PAGE 49.
Hardware:
(19) Pulley
1 PC
(54) Pulley Bushing
2 PCS
(76) Hexagon Head Bolt
M10x70
1 PC
(65) Flat Washer Ø10
2 PCS
(83) Nylon Lock Nut M10
1 PC
(87) Low Cable
1 PC
14
17
17
14