17
Step 4
Fitting the Weight Stack Sliding Rods (10) (Get someone else to support rods when fitting).
Slide two Weight Stack Sliding Rods (10) into the Rear Base Tube (4) with a Bottom Weight
Stack Cover Bracket (93).
Secure the Weight Stack Sliding Rods (10) into the Rear Base Tube (4) with two Hexagon
Socket Countersunk Head Bolts (80). Tighten bolts with the 6 mm Allen Wrench provided.
Slide one Rubber Bumper (29) onto each of the Weight Stack Sliding Rods (10) from top and
slide down to bottom.
Rubber Bumpers (29) are at bottom of the Weight Stack Sliding Rods (10).
Hardware:
(80) Hexagon Socket
Countersunk Head Bolt
2 PCS
(29) Rubber Bumper
2 PCS
