Life Gear 63142 Owner'S Manual Download | Manualshive

Page: 40 / 62

background image

39

Step 2

Route the High Cable (85) underneath the Pulley (19) and forward through the Top Frame
(7).    Attach the Pulley (29) to the Top Frame (7) with one M10x45 Hexagon Head Bolt (74),
one M10 Nylon Lock Nut (83), and two Ø10 Flat Washers (65).    Tighten bolt and nylon lock
nut with two 14-17 Double Open End Wrenches provided.
Route the High Cable (85) over the Pulley (19) and downward through the Top Frame (7).
Attach the Pulley (29) to the Top Frame (7) with one M10x45 Hexagon Head Bolt (74), one
M10 Nylon Lock Nut (83), and two Ø10 Flat Washers (65).    Tighten bolt and nylon lock nut
with two 14-17 Double Open End Wrenches provided.

PLEASE REFER TO THE “HIGH CABLE LOOP DIAGRAM” SECTION ON
PAGE 36.

Hardware:

(19) Pulley

2 PCS

(74) Hexagon Head Bolt

M10x45

2 PCS

(65) Flat Washer Ø10

4 PCS

(83) Nylon Lock Nut M10

2 PCS

17

14

14

17

«
...
38
39
40
41
42
...
»

Summary of Contents for 63142































































Reviews:

No comments

Related manuals for 63142

Pro 9545 WESY95450

Brand: Weider Pages: 16

256 831.15791.2

Brand: WeiderPro Pages: 16

Brand: ParaBody Pages: 9

Brand: Titanium Strength Pages: 33

Brand: LifeGear Pages: 37

Brand: Matrix Pages: 2

Brand: Impex Pages: 14

SPX Max Reformer with Vertical Stand

Brand: Merrithew Pages: 4

Brand: Tunturi Pages: 88

Brand: Tunturi Pages: 88

Brand: Denfit Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands