Lifan LFQ3690-CA, Operating Instructions And Owner'S Manual

Page: 27 / 50

26
Operation of Pressure Washer
Pressure Washer Use Location:
WARNING!
Running pressure washer gives off carbon monoxide gas. It is odorless, colorless, and
highly toxic.
Breathing carbon monoxide gas can leads to fainting, nausea or may result in death.

Only operate pressure washer outdoors.
 Prevent exhaust gas from entering, through windows doors or ventilation intakes, any confined areas.

DO NOT operate pressure washer inside any enclosed or roofed areas.
BEFORE OPERATING PRESSURE WASHER: Refer to Pre--‐Operating Instruction section for
additional procedures and definitions.
1. Check pressure washer condition.
a. Inspect for signs of damage, oil or fuel leaks.
b. Remove excessive dirt and/or debris from the unit.
2. Check Inlet, Outlet, and Chemical Injection Hoses.
a. Inspect general condition of hoses to ensure hoses are in serviceable condition.
i. Outlet Hose must be constructed to withstand High-‐‐Pressure.
b. Ensure hoses and nozzles are securely installed.
3. Check the Engine.
a. Ensure proper engine oil amount.
b. Ensure air cleaner element is clean and installed.
c. Ensure proper fuel level amount.
4. Ensure pressure washer is on a level surface.
5. Ensure engine switch is in the “OFF” position.
6. Ensure pressure washer is at least 7ft away from building walls and other equipment
during operation. Do NOT place flammable objects close to pressure washer.
7. Always operate within the length of your water hose for inlet pressure.
8. Do not operate with any tarps, covers, and any objects on top of the unit.
9. Exhaust gas is hot and can cause combustible materials around your unit to ignite,
make sure unit is not operated within 7 feet of any combustible materials and always
keep a properly charged fire extinguisher and be familiar with the use of the fire
extinguisher.