Lifan LFQ3690-CA, Operating Instructions And Owner'S Manual

Page: 30 / 50

29
Operation of Pressure Washer
STOPPING THE ENGINE:
Refer to the Controls and Features section for additional diagrams and definitions.
IN EMERGENCY:
1.
Turn the engine switch to the “OFF” position.
2. Turn the inlet water supply to the “OFF” position.
3. Depress gun trigger to expel remaining pressurized water.
NORMAL PROCEDURE:
1. If the chemical injection hose was used with chemicals, allow pressure washer to
operate for three (3) minutes while in-‐‐ taking clean water through chemical injection
hose.
2. Move the throttle valve lever to the “LOWER” position.
3. Turn the engine switch to the “OFF” position.
4. Turn the fuel cock to the “OFF” position.
5. Depress the spray gun trigger.