Lifan LFQ3690-CA, Operating Instructions And Owner'S Manual

Page: 16 / 50

15
Pre-Operating Instructions: Assembly
UNPACKING THE PRESSURE WASHER:
1.
Set the carton on a flat, rigid surface.
2.
Remove all loose contents from carton EXCEPT the Engine/Pump/Bottom Frame portion of pressure
washer and set them beside carton.
3.
Open box completely by cutting each corner from top to bottom.
4.
Leave Pressure Washer on the remainder of the box until Wheel Kit is installed. Never attempt to put oil in
engine or operate the equipment until fully assembled.
5.
Locate all box contents and place them beside the pressure washer. (Some Items may be packaged within the
voids of the pressure washer itself.)
INSTALLATION:
The Following Tools are needed to assemble the Pressure Washer:

Safety Glasses

8mm-‐‐14mm Wrench Set

8mm-‐‐14mm Ratchet & Socket Set

18mm Ratchet & Socket
HANDLE INSTALLATION: LFQ3690-CA, LFQ4515(E)-CA
1. These units come with 2 locking handles. The mount bracket to the frame is pre-drilled and threaded for the 4 bolts to
attach the handle.
With locked up and down Clevises Pin for Locking Locked in Down Locked in up