LIFAN Power USA
2205 Industrial Park Road
Van Buren, AR 72956
866-‐471-‐7464
www.lifanpowerusa.com
7
Safety Instructions
(continued)
WARNING!
Fuel and its vapors are extremely flammable and explosive.
Fire or explosion can cause severe burns or death.
WHEN ADDING OR DRAINING FUEL
•
Turn pressure washer off and let it cool for at least three minutes before removing fuel cap. Loosen cap slowly in
order to relieve pressure in the fuel tank.
•
Fill or drain fuel tank outdoors. Do not excessively inhale fuel vapors.
•
Keep away from open flames or sparks and other sources of ignition.
•
Do NOT smoke while filling fuel tank.
•
Do NOT overfill tank. Allow space for fuel expansion.
WHEN TRANSPORTING OR REPAIRING EQUIPMENT
•
Transport pressure washer with the fuel valve in the off position.
•
Repair pressure washer with the fuel tank empty or the fuel valve in the off position.
•
Disconnect spark plug wire before transport or service.
WHEN STORING FUEL OR EQUIPMENT CONTAINING FUEL
•
Store away from furnaces, stoves, water heaters, clothes dryers or other appliances that have pilot light or other
ignition source because they can ignite fuel vapors.
WHEN STARTING EQUIPMENT
•
Ensure spark plug, muffler, air cleaner, and fuel cap are in place.
•
Do NOT crank engine with spark plug removed.
•
If fuels spills, wait until it evaporates before starting engine.
WHEN OPERATING EQUIPMENT
•
Do NOT choke carburetor to stop engine.
•
Do NOT tip engine or equipment at an angle, which causes fuel to spill.
WARNING!
Rapid recoil of starter cord (kickback) may pull hand and arm forward
toward engine at a rapid rate.
Broken bones, bruises, sprains, and fractures may result.
•
When starting engine, pull cord slowly until tension is felt, then pull rapidly to avoid
kickback.
