LIFAN Power USA
2205 Industrial Park Road
Van Buren, AR 72956
866-‐471-‐7464
www.lifanpowerusa.com
17
Pre-‐Operating Instructions
: Connecting
Inlet/Outlet/Chemical Injector Hose
(continued)
CONNECTING CHEMICAL INJECTOR HOSE
: Water to Chemical ratio is 7:1.
NOTE: The Chemical Injector Hose provided is the white/clear hose and should be
used in unison with the Spray (black) Nozzle.
CAUTION: WHEN USING CHEMICALS OR CLEANING SOLUTIONS:
•
Use the Spray (Black) Nozzle.
•
Use ONLY soaps and chemicals designed for pressure washer use.
•
Do NOT use bleach.
•
Ensure water to chemical ratio is 7:1.
•
Ensure chemicals are NOT allowed to remain in pump after use. Failure
to clean chemicals out of pump will damage unit and void warranty.
1.
Connect the Chemical Injector Hose to the Chemical Injector Connection on
Pump. Tighten Securely.
2.
Place alternate end of Chemical Injector Hose into chemical/cleaning solution to
be used. This end of the Chemical Injector Hose will have a filter to keep foreign
debris from entering pump.
3.
After use of Chemicals/Cleaning Solutions, place the end with the filter of the
Chemical Injector Hose in clean water and allow to operate for three (3) minutes.
NOTE:
Chemicals will NOT siphon while Spray Wand is in High-‐Pressure settings.
