LIFAN Power USA LF4250EPL, Operating Instructions And Owner'S Manual

Page: 21 / 54

20
Pre-Operating Instructions: Battery Specifications
The Battery is NOT included with your Platinum Series Generator. These units require an Acid Cell Battery. This
battery is used in many applications, such as lawnmowers, ATV’s, motorcycles, etc. and can be found at many
retailers and dealers including where you purchased this Power Equipment Product. Use the “Battery
Specifications” chart below to attain the specifications of the necessary battery. Or, use the “Cross Reference
Models” chart below to match up with the manufacturer’s model number with the brand battery available at
your local retailer.
BATTERY SPECIFICATIONS
Generator
Model
Length
(inch)
Width
(inch)
Amp
(hrs)
DC Voltage (Volts)
LF4250EPL-CA 5.25 in 3 in 10 12V
LF8750iEPL 5.3125 in 3.1875 in 12 12V
Warning
Follow all the battery manufactures’ warnings for proper
installing of your battery in order to prevent damage to
personnel or equipment.
1. Battery leads consist of a Red (hot) lead that connects to the (+) battery post and is connected to the (+)
terminal on the starter solenoid and a Black lead which is connected to the (-‐‐) negative battery terminal and
the frame mounting bolt.
2. Connect the Red (hot) terminal to the battery.
3. Connect the Black (negative) terminal to the battery.
Your Electric Start Model is equipped with a 5a Trickle Charger Built in, simply
plug it into the T type recepatacle on the control panel and a 110v receptacle to
maintain or recharge your battery.
1
2
3