IPEX6000TC-F
Install Guide
7
Arranger Server Login
Connect Arranger Controller
Once the hardware controller has been connected to the AV Network, the Arranger server application can be
accessed via web browser on any PC that is connected to the same AV Network switch. By default the IP address
for the Arranger server is 169.254.1.1. For initial system setup your PC will need to be in the same Network ID, i.e.
169.254/16.
Upon first login of the Arranger server you will be asked for an unlock code for your license, once the license has
been entered you will be prompted for login credentials, by default the user name is
admin
and the password is
admin
to login to the system initially.
Once logged in you will be asked to change the admin login password.
Best Practice
Log the changed password that you created in your project documentation spreadsheet.
Once logged in you can configure, manage and control all signal types for the DigitalinxIP 6000 series devices. A
complete operation manual and API for the Arranger system is located in the Arranger server application.
The provided Arranger hardware controller with the DigitalinxIP system should be hardwired via Ethernet to the
AV network switch.
Device / System Control
Arranger
is an AVoIP server application that will configure and manage the 6000 series on an AV IP Network.
Arranger is licensed per endpoint for one AV Network and a license unlock code should have been provided upon
purchase of the Arranger DigiIP 6000 series license.
If you are missing the license unlock code contact [email protected] and have serial number of the hardware
controller nearby to confirm system license
Summary of Contents for DIGITALINXIP SDVoE IPEX6000TC-F
Page 2: ......
