IPEX6000TC-F
Install Guide
8
Connecting IR Components
The IR connections on the transceivers provide a means to control remote IR equipment.
Note:
Please ensure power is disconnected from the encoders and decoders before connecting the IR receiver to
the IR input ports on the devices.
Connecting Serial / RS232 Compatible Devices
The RS232 connections on the transceiver provide a means to control 3rd party devices using serial commands.
Connect the TX, RX, and ground control signal wires to the removable 3-pole terminal block, be sure the wiring
from transceiver to the device is TX - RX, RX - TX, G - G. See illustration below
Connecting HDMI Devices
Connecting Audio Devices
Use only high quality High Speed HDMI cables rated for 18Gbps, do not exceed HDMI cable lengths over 5m/15’ for
transceiver HDMI connections to AV sources and displays.
The 3.5mm analog audio I/O connection can be configured as an input or an output and is configured in the
Arranger server. Connect a 3.5mm stereo audio cable to the transceivers audio I/O port
Note
: Audio output is 2 channel stereo audio only and is not capable of downmixing multi channel audio
Connecting USB Devices
A transceiver can be configured as either a USB host or client, this is configured in the Arranger server. Connect
USB components to transceivers with USB 2.0 rated cables, do not exceed cable lengths over 5m/15’
Note: 6000 Series supports USB HID, which is ideal for simple KVM or touch control. Do not use high quality USB
microphones or webcams on this transceiver
Summary of Contents for DIGITALINXIP SDVoE IPEX6000TC-F
Page 2: ......
