IPEX6000TC-F
Install Guide
6
System Installation Instructions
Connecting Transceivers to Network Switch
The 10GbE PoE managed network switch must be configured for multicast video operation.
Note:
A 1G network switch cannot be used with the 6000 series due to the high port speed requirements of the
IPEX6000TC-F, a 10GbE managed network switch is required.
Liberty has documented several network switch settings for many common switch manufacturers, see
documents related to this product on the product page of the Liberty AV website (www.libav.com).
Connect a duplex multimode LC-LC fiber cable from the network switch to the appropriate transceivers 10GbE SFP+
port. An SFP+ 10G LC-LC fiber transceiver is included in the package contents.
Note:
Be sure to connect the DC power supplies to the transceivers as fiber optic cabling does not support power.
Best Practice
When installing the AV endpoints, create a spreadsheet of all AVoIP transceivers notating the MAC address, the
attached source/sync and the desired transceiver function, i.e. encoder, decoder or both. This will aid in fast
final system commissioning that could be done remotely by accessing the AV system server via VPN or via port
forwarding. See Arranger Documentation for more information on how to access the server and set up port
forwarding.
The 6000 series devices default to DHCP so a router or DHCP server can assign an IP address to the device
automatically. If there is no router or DHCP server present it will default to APIPA i.e. 169.254/16 Network ID. You
will use the
Arranger
application to find and manage 6000 devices on a Network.
See Device / System Control.
Device IP Settings
Summary of Contents for DIGITALINXIP SDVoE IPEX6000TC-F
Page 2: ......
