background image

IPEX6000TC-F

 Install Guide

3

The IPEX6000TC-F is an AVoIP powered A/V transceiver integrated with both encoder and decoder configuration 

which can transmit and receive video signals simultaneously.  The DigitalinxIP IPEX6000TC-F supports IP-based 

switching and extension of true 4K/60Hz (4:4:4) video with zero frame latency up to 300 meters / 984’ when using 

multimode fiber optic cabling. The transceiver supports independent routing of all AV, USB HID, IR, Ethernet and 

RS232 signals. All transceivers on an AV network can simultaneously transmit and receive full 4K 60 4:4:4 signals. 

The IPEX6000TC-F is HDMI 2.0 and HDCP 2.2 compliant and supports all video resolutions that fit into the HDMI 2.0 

timing envelope of 594 MHz, such as 4K@60Hz 4:4:4 24bpp and 4K@60Hz 4:2:0 30bpp HDR, including DolbyVision, 

HDR10 and HLG. The transceiver features lite compression technology which is activated automatically when the 

raw data rate exceeds the Ethernet bandwidth so that all supported timing formats can be delivered through a 

duplex multimode OM3 LC-LC fiber optic cable. 

The IPEX6000TC-F can be used in a point to point installation or in a matrix configuration that supports routing of 

one to one and one to many including multi-view for single display outputs and video wall configurations up to 

an 8x5 (Rows x Columns).  

When multiple IPEX6000TC-F transceivers are deployed on an AV network, for basic system access and operation, 

a license code from Liberty’s Arranger offering is required.

Port speed requirements for each transceiver is 6-8Gbps for 4K signals and 3.2Gbps for 1080P signals, therefore 

the IPEX6000TC-F requires a 10GbE managed network switch for optimal performance

Note: 

1GbE managed network switches are not supported. 

Product Features

IPEX6000TC-F Transceiver

Package Contents

1. 

Installation Guide

2. 

10G LC-LC Fiber Optic Transceiver

3. 

DC 12V 2A Power Supply with US, UK, EU, and AU adapters

4. 

3-pin Removable Phoenix Screw Terminal

5. 

Mounting Ears (2 ea)

6. 

IR Emitter

7. 

IR Receiver

Summary of Contents for DIGITALINXIP SDVoE IPEX6000TC-F













Reviews: